J

Administrator
Staff member
Aug 14, 2019
10
0
1
Enhanced Interior Gateway Routing Protocol (EIGRP) is an open-standard distance vector protocol developed by Cisco.  Routers running EIGRP must form neighbors before they can begin to exchange routes.  The multicast address for EIGRP communication is over 224.0.0.10.











In this lab we will configure four routers running EIGRP Autonomous System 10.  Only routers with the same AS can communicate together.



ConfigurationGigabitEthernet0/0 are 24bit CIDR (255.255.255.0)Loopback0 are 32bit CIDR (255.255.255.255)



R1#show ip int brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 192.168.1.1 YES manual up up
Loopback0 1.1.1.1 YES manual up up
!
R2#show ip int brief
Interface IP-Address OK? Method Status Protocol...
Continue reading...
 
Last edited: